Epson Stylus Color Pro/Pro XL
1. Seal the outlet hole(s) in the base of the cartridge with the aluminum tape provided. A separate piece over hole. 2. Peal up the bottom of the label on the top of the cartridge to reveal the sealed filling hole(s). 3. Puncture the seal to the filling hole with the filling needle. (See diagram for filling hole color). Insert the filling needle into the cartridge. The cartridge contains sponge and a slight resistance will be felt. 4. Slowly inject up to 12ml. the correct color of ink or until ink appears at the filling hole. 5. Seal the filling hole with the aluminum tape provided. 6. Unused ink may be returned to the bottle. Rinse the syringe with warm water before it used with a different color ink. 7. Replace the cartridge in the printer and allow to stand for up to 4 hours. 8. Replace the cartridge and run a priming cycle as per printer instructions.
|