COMPAQ IJ 200/300
COLOR CARTRIDGE
1. The fill holes of the cartridge are located under the cartridge cap. Remove the cap before refilling by carefully prying it off with pocket knife.
2. Insert the filling needle into the fill hole of the color to be refilled.
3. While watching the print heads slowly inject up to 8 ml. of the correct color ink into the cartridge. At the first sign of ink coming out of the print head stop filling that color and draw back on the syringe plunger approximately 1/8 inch. This will help you to avoid overfilling and cross contaminating the inks at the print head. Clean the syringe with warm water, before refilling with another color.
4. Clean the syringe with warm water before refilling with another color.
4. After refilling the top can be put back on with scotch tape.
The photo cartridge is filled the same way as the regular color cartridge.
BLACK CARTRIDGE
1. Enlarge the vent hole on the top of the cartridge using the hand drill provided. (Do not remove the top.)
2. Fill the syringe with 12-25 ml. of ink, insert the needle into the vent hole and push down into the center of the cartridge. Slowly inject up to 25ml. of black ink into the cartridge.