Brother 5000/7000 Series
1. Cover the ink outlet hole with a small piece of aluminum tape provided. If this is not done the ink will run out of the outlet hole when the hole is drilled in the top of the cartridge. See #3.
2. Peel the label back label as shown in photo.
3. Using the drill provided drill into fill hole under the label.
4. Fill the syringe with 10 ml. of black ink. 5-8 ml of color ink for the color cartridge.
5. Slowly inject the ink into the sponge until the cartridge is full.
6. Seal the hole made in the top label with the aluminum tape provided. If the holes are not sealed properly the cartridge will leak.
7. Unused ink may be returned to the bottle. Clean the syringe with warm water and dry for future use, or use with a different color ink.
8. Replace the cartridge and run 1 - 3 cleaning cycles. If necessary leave cartridge in printer for up to 24 hours. (This allows the ink to gravitate to the print head).